Powerplus POWX357 PAINT SPRAY STATION 900W EN - Manual (Page 4)

POWX357
Copyright © 2012 VARO P a g e | 4
Read manual before use
"Class II
double insulated; Earthing
wire is therefore not
necessary
Wear gloves
Wear a mask In dusty
conditions
Wearing of protective shoes
advised Wear ear guards and
goggles
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area

Keep working area clean and well lit. Untidy and dark areas can lead to accidents.

Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.

Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety

Always check that the power supply corresponds to the voltage on the rating plate.

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matchin
reduce the risk of an electric shock.

Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.

Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it
will increase the risk of an electric shock.

Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock.

When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.

If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety

Stay alert, watch what you are doing and use common sense when operating a po
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention when operating a power tool may result in serious
personal injury.

Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
EN
www.varo.com
"Class II - The machine is
double insulated; Earthing
wire is therefore not
necessary
Wear a mask In dusty
conditions
Wear ear guards and
goggles
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
gs refers to your mains-
Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
gs, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
Keep children and bystanders at a distance when operating a power tool. Distractions can
Always check that the power supply corresponds to the voltage on the rating plate.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
rain or wet conditions. If water gets inside a power tool, it
Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
ng parts. Damaged or
When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention when operating a power tool may result in serious
safety equipment such as a
skid safety shoes, a hard hat, or hearing protection whenever it is needed