Powerplus POWXG2015 HEDGE TRIMMER 25,4CC 600MM EN - Manual (Page 7)

POWXG2015 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8 OPERATING INSTRUCTIONS
8.1 Starting the engine
Move at least 3 metres away from the place of refuelling. Place the hedge trimmer on a clean
area of ground and make sure that the cutting tool does not come into contact with the ground
or any other objects.
Keep the blades clear of everything around, since they will start moving as
soon as the engine starts.
8.1.1 Cold starting
If the engine is cold or if it has been stopped for more than 5 minutes or if fuel has been added
to the engine.
 Push the I-O switch (1) to the "I" position.
1. Throttle lever
2.Engine switch
3.Stop
4.Run
 Push the primer pump gently (7 to 10 times)
until fuel begins to flow into it.
 Move the choke lever (5) to position “ ”