Extron electronic PoleVault Systems PVS 400 - Manual (Page 32)

PoleVault Systems Installation • Installation — Stage 3 2-20
Installation — Stage Three, cont’d
5. Finish speaker installation
a. Install/replace the speaker grill on the front of the
speaker, using the supplied adhesive tabs (putty) to
secure it in place.
b. Repeat cabling and final installation steps for all
speakers, connecting the speakers according to the
system preferred (e.g in parallel, see page 2-19)
Apply 4 pieces of black putty
(supplied), equally spaced 90°
apart, to the upper inside edge
of the grille.
5a Apply putty to speaker grill.