Extron electronic PoleVault Systems PVS 400 - Manual (Page 12)

PoleVault Systems Installation • Introduction — Inventory Overview 1-10
Introduction
—
Inventory Overview, cont’d
d. Installation tools
To aid the professional installer, this checklist gives the tools recommended to complete the installation.
Tools should include, but are not confined to:
• Laser level, or two levels (large for screen installation, small for wall plates and projector mounts)
• Tape measure
• Stud finder
• Drill and drill bit set including a Unibit to cut through metal studs
• Extension drill bit (3/4" min., 4 to 8 foot length, to drill through fire-breaks)
• Socket set
• Pipe strap or wrapped pipe wrench
• Lineman’s pliers and wire strippers
• Standard screwdriver set and Tweeker
• Cable cutters (to cut safety wire)
• Dry wall saw and hacksaw blade mounted on handle (for cutting ceiling tiles)
• Flashlight and safety goggles
• Razor knife
• 2" hole saw
• Painter's tape (to mark up walls), pencil, and marker pen
• RJ-45 crimpers and RJ-45 connectors
• Voltage tester
• Fish tape, pull string, and electrical tape (for taping fish tape to pull string)
• Zip ties
• Vacuum cleaner
• Heat gun