EPoX Computer EP-6VBA - Manual (Page 3)

EP-6VBA
User Notice
No part of this product, including the product and software may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without the express written permission of
EPoX Computer Company (here in after referred to as EPoX) except documenta-
tion kept by the purchaser for backup purposes.
EPoX provides this manual “as is” without warranty of any kind, either express or
implied, including but not limited to the implied warranties or conditions of
merchantability or fitness for a particular purpose. In no event shall EPoX be
liable for any loss or profits, loss of business, loss of use or data, interruption of
business or for indirect, special incidental, or consequential damages of any kind,
even if EPoX has been advised of the possibility of such damages arising from
any defect or error in the manual or product. EPoX may review this manual from
time to time without notice. For updated BIOS, drivers, or product release
information you may visit EPoX’s home page at: http://www.epox.com
Products mentioned in this manual are mentioned for identification purposes only.
Product names appearing in this manual may or may not be registered trademarks
or copyrights of their respective companies.
The product name and revision number are both printed on the mainboard
itself.
Handling Procedures
Static electricity can severely damage your equipment. Handle the EP-6VBA
and any other device in your system with care and avoid unneccessary contact
with system components on the mainboard.
Always work on an antistatic surface to avoid possible damage to the motherboard
from static discharge.
We assume no responsibility for any damage to the EP-6VBA mainboard that
results from failure to follow installation instructions or failure to observe safety
precautions.
CAUTION
The EP-6VBA mainboard is subject to
damage by static electricity. Always
observe the handling procedures.