EPoX Computer EP-6VBA - Manual (Page 31)

BIOS
EP-6VBA
Page 4-3
Virus Warning : Disabled
CPU Internal Cache : Enabled
External Cache : Enabled
CPU L2 Cache ECC Checking : Disabled
Quick Power On Self Test : Enabled
Boot Sequence : A, C, SCSI
Swap Floppy Drive : Disabled
Boot Up Floppy Seek : Enabled
Boot Up NumLock Status : On
IDE HDD Block Mode : Enabled
Gate A20 option : Fast
Memory Parity/ECC Check : Disabled
Typematic Rate Setting : Disabled
Typematic Rate (Chars/Sec) : 6
Type matic Delay (Msec) : 250
Security Option : Setup
PCI/VGA Palette Snoop : Disabled
OS Select For DRAM > 64MB : Non-OS2
Note: The “Halt On:” field is used to determine when to halt the system
by the BIOS if an error occurs.
Note: Floppy 3 Mode support is a mode used to support a special 3.5”
drive used in Japan. This is a 3.5” disk that stores only 1.2 MB,
the default setting for this is disabled.
4-2 BIOS Features Setup
Selecting the “BIOS FEATURES SETUP” option in the CMOS SETUP UTIL-
ITY menu allows users to change system related parameters in the displayed
menu. This menu shows all of the manufacturer’s default values for the EP-
6VBA.
Pressing the [F1] key will display a help message for the selected item.
Figure 3: BIOS Features Setup
Virus Warning:
During and after the system boots up, any attempt to write to the boot sector
or partition table of the hard disk drive will halt the system and an error
message will appear.
You should then run an anti-virus program to locate the virus. Keep in mind
that this feature protects only the boot sector, not the entire hard drive.
The default value is Disabled.
ROM PCI/ISA BIOS(2A6LGPAA)
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Esc : Quit : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift) F2 : Color
F7 : Load Setup Defaults
й й й й й к к к к к и и и и и з з з з з
Video BIOS Shadow : Enabled
C8000-CBFFF Shadow : Disabled
CC000-CFFFF Shadow : Disabled
D0000-D3FFF Shadow : Disabled
D4000-D7FFF Shadow : Disabled
D8000-DBFFF Shadow : Disabled
DC000-DFFFF Shadow : Disabled