Sybase ADAPTIVE 15.0.2 - Manual (Page 61)

CHAPTER 3 Post-Installation Tasks
Installation Guide Evaluation Version 45
2 Determine the type (raw partition, logical volume, operating system file,
and so on) and location of the device where you will be storing the
interpubs database. You will need to provide this information later.
3 Make a copy of the original installintpubs script. Be sure you can access
this copy, in case you experience problems with the edited script.
4 Use a text editor to edit the script, if necessary, to specify a default device
other than the
master device, or use sp_diskdefault .
5 Execute the script, using the -J flag to ensure that the database is installed
with the correct character set:
isql -Usa -Ppassword -Sservername -Jiso_1 \
-i $SYBASE/$SYBASE_ASE/scripts/iso_1/installintpubs
For more information on the -J option in isql , see the Utility Guide.
jpubs database
If you installed the Japanese Language Module with your Adaptive Server, the
scripts file contains the installjpubs script for installing the
jpubs database.
jpubs is a database similar to pubs2 that contains Japanese data. installjpubs
uses the EUC-JIS (eucjis), UTF-8 (utf8), or the Shift-JIS (sjis) character sets.
Verify that you are running SunJLE to ensure that your system can display
Japanese data correctly.
v Installing the jpubs database
1 Set your terminal to display 8-bit characters.
2 Verify that the EUC-JIS, Shift-JIS, or UTF-8 character set is installed as
the Adaptive Server default character set or as an additional character set.
3 Determine the type (raw partition, logical volume, operating system file,
and so on) and location of the device where you will be storing the
jpubs
database. You will need to provide this information later.
4 Make a copy of the original installjpubs script. Be sure that you can access
this copy, in case you experience problems with the edited script.
5 Use a text editor to edit the script, if necessary, to specify a default device
other than the
master device, or use sp_diskdefault . See “Default devices
for sample databases” on page 43.
6 Execute the installjpubs script, using the -J flag to ensure that the database
is installed with the correct character set: