Emerson Process Management Wireless Gateway 1420 - Manual (Page 12)

Quick Installation Guide
00825-0100-4420, Rev CA
June 2007
1420 Wireless Gateway
12
P RODUCT C ERTIFICATIONS
Approved Manufacturing Locations
Rosemount Inc. – Chanhassen, Minnesota, USA
Telecommunication Compliance
All wireless devices require certification to ensure that they adhere to regulations regarding
the use of the RF spectrum. Nearly every country requires this type of product certification.
Emerson is working with governmental agencies around the world to supply fully compliant
products and remove the risk of violating country directives or laws governing wireless
device usage. To see which countries our devices have received certification for use in, see
www.rosemount.com/smartwireless.
European Union Directive Information
The EC declaration of conformity for all applicable European directives for this product can
be found on the Rosemount website at www.rosemount.com. A hard copy may be obtained
by contacting your local sales representative.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
Electro Magnetic Compatibility (EMC) (2004/108/EC)
EN 61326-1: 1997 with amendments A1, A2, and A3– Industrial
Radio and Telecommunications Terminal Equipment Directive
(R&TTE)(1999/S/EC)
Emerson Process Management complies with the R&TTE Directive
FM Ordinary Locations Approval
The 1420 Wireless Gateway has been evaluated and approved by FM for ordinary
locations.
CE EMC Marking
Compliance with European Union EMC
Hazardous Location Certifications
North American Certifications
N5 FM Division 2
Certificate Number: See Certificate
Nonincendive for Class I, Division 2, Groups A,B,C, and D;
Dust Ignitionproof for Class II,III, Division 1,
Groups E,F, and G; Indoor/outdoor locations;
NEMA Type 4X
Temperature Code: T4 (-40°C < T
a < 60°C)
1420_QIG_Rev_CA.fm Page 12 Thursday, June 7, 2007 1:18 PM