Elation Professional Power Wash 575E - Manual (Page 10)

Elation Lighting www.elationlighting.com 10
a) Camlock system: This system allows you a fast and efficient setup of
clamps. Attach the two camlocks to designated position on the
backside of the case and close the locks by turning them 90°. Verify
the secure fit of the camlock system. The clamps themselves are
directly attached permanently on the camlocks.
90°
b) Use two clamps direct on the backside of the POWER POWER WASH WASH 575E 575E
to mount the unit on a truss (each two opposite threads max. M10x20).
4x M10x20mm
4x Camlock
2.2 Secure the POWER WASH 575E POWER WASH 575E
Regardless of the rigging of the POWER POWER WASH WASH 575E 575E you have to use a
stipulated safety wire. Therefore you have to thread to safety wire through to two
provided holes on the backside of the fixture and connect it with the truss-
support. Pay attention to a safe and proper fastening.