Elation Professional Power Wash 575E - Manual (Page 24)

Elation Lighting www.elationlighting.com 24
Channel Function Time and Value DMX HEX %
lying eight size / phase see also PAN 192..22
3
C0..DF 76..87
random movement size see also PAN 224..25
5
E0..FF 88..100
Pan/Tilt relative movement 0..01 00..01 0..1 15) Speed
Pan/Tilt Pan/Tilt slow – fast
Use this channel 14) also for the
speed of the movements (channel
13).
Pan Min. 530° = 200 s
Pan Max. 530° = 2.65
s
Tilt Min. 285° = 110 s
Tilt Max. 285° = 1.8 s
02..255 02..FF 2..100
Lampe ON Shutter open 254..25
5
FE..FF 99..100
Lampe OFF Channel 9 ( min. 3 sec. ) (only if
shutter is closed, channel 9 = 0 ..15)
230..24
9
E6..F9 92..97
*) Set the function “ FCOL ” ‘ ON ’ if you want to control the color wheel continuously.
5 Change the Lamp
For a frictionless operation pleas read this chapter carefully and follow all instructions.
5.1 Safety Regulations
• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Don’t touch the bulb of the lamp with bare fingers (this can cause damages).
• Before you put the POWER WASH 575E
POWER WASH 575E into operation close the casing,
otherwise your retina can be hurt!
5.2 Realize the Lamp Change
1. Pull out the main plug!
2. The lamp can be changed in a very comfortable way directly from the
backside of the case without opening the head.
3. Open the four recessed head screws (1, 2, 3 and 4) of the backside lamp
sheet and remove it carefully.
4. Remove the old or broken lamp by opening the two sidewise lamp screws.
Attention: The glass bulb of the lamp can splinter. For that reason remove
the lamp with safety gloves or some cloth.
5. Put in the new lamp securely with a tight fit into the socket and close the two