Elation Professional Power Wash 575E - Manual (Page 9)

Elation Lighting www.elationlighting.com 9
2 Preparation and Installation
2.1 Mounting
The POWER POWER WASH WASH 575E 575E is fully operational whether it hangs or is mounted
to the wall. It can also be operated while standing on the floor. Keep a safety
distance of 0.5 m towards any easy inflammable materials (decoration etc.).
Install a safety wire that can hold at least 10 times the weight of the fixture. Never
use the carrying handles for secondary attachment.
Pay attention to the regulations of: BGV C1 (former VBG 70) and
DIN VDE 0711-217 !
The installation should be done by qualified staff only.
2.1.1 Clamps
There are two major possibilities to mount the POWER POWER WASH WASH 575E 575E
together with clamps. Camlock system or direct mounting of clamps. In
both cases you have to regard a sufficient stability of the system. For
installation instructions please see also printing on the backside of the
case.