Elation Professional Power Wash 575E - Manual (Page 20)

Elation Lighting www.elationlighting.com 20
MAGE - 99 - + 99 Coarse adjustment of the Magenta color wheel
YELL - 99 - + 99 Coarse adjustment of the Yellow color wheel
3.10.9 Default Settings (DFSE)
DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to
the default values. On the display will appear
ok to indicate that the de-
faults are set.
Function Display Default Settings
DMX Address D001 D001
Pan reverse RPAN ON OFF ¸
Tilt reverse RTLT ON OFF ¸
Automatic lamp on LAAU ON OFF ¸
Lamp on via DMX DLOF ON ¸ OFF
Display DISP D ON ¸
Cooling fan FANS HIGH REG ¸ LOOF LOHI
Feedback FEED ON ¸ OFF
3.10.10 Position Feedback (FEED)
FEED
The POWER WASH 575E POWER WASH 575E is provided with a automatic position
correction (feedback) for the Pan and Tilt movement. Use the Up/Down-
keys to select
ON if you want to enable the feedback function or Off if you
don't want this function. Press Enter to confirm or Mode to cancel and
return to the menu.
3.10.11 Correction of faults (EFLG)
EFLG
(Function available for authorized persons only)
3.11 Error and Information Messages
HEAt This message appears if you try to switch on the lamp within 5
minutes after having switched off (lamp too hot). The message will
appear on the display if the lamp doesn’t ignite within 20 seconds.
The fixture will store this command and automatically ignite the lamp
after 5 minutes.