Extron electronic HSA 822 - Manual (Page 10)

HSA 822 Hideaway ® Enclosure • Installation HSA 822 Hideaway ® Enclosure • Installation
Installation, cont’d
2-6
6 . Remove the plastic strips that protect the flanged edges of
the top of the surface enclosure. If a sticky residue
remains, remove it with an appropriate metal cleaning
product.
CAUTION Do not use isopropyl alcohol or other solvents to
clean the HSA. Strong solvents will ruin some
finishes.
7 . Carefully lower the HSA enclosure into the hole to test the
fit. If necessary, remove the enclosure and use a file or
rasp to enlarge or smooth the edges of the opening.
8 . From the underside of the table, bolt the clamshell to the
enclosure with two bolts of optimum length (included)
(figure 2-3).
9 . Peel any remaining protective coating from the enclosure.
Mounting
Surface
Full Thread
Mounting Bolts
AAP Cables
Flat Washer
Power Cord
RJ-45 Connectors
Clamshell
HSA 822
CO MPU TER
INP UT SEL ECT AU DIO
Figure 2-3 — Mounting the HSA 822 enclosure
2-7