Extron electronic HSA 822 - Manual (Page 23)

HSA 822 Hideaway ® Enclosure • Reference Information HSA 822 Hideaway ® Enclosure • Reference Information
Reference Information, cont’d
-or-
A-4
Included Parts
Part
HSA 822 HSA Hideaway Products manual
Snap-in icon inserts
RJ-45 connector bezel plug-in inserts
(assorted colors and blank)
1/4 - 20, 1", 1 ½", 2", 2 ½" full thread bolts
M6 x 65 mm, 50 mm, 40 mm, 25 mm full thread bolts
Template, Replacement Parts, and Accessories
Part Part number
HSA 822 routing template 70-191-01
HSA 822 standard (10 lb) gas lift 70-193-01
HSA 822 12 lb gas lift 70-193-02
HSA 822 15 lb gas lift 70-193-03
HSA 822 RJ-11 cable kit 70-226-01
HSA 822 flexible conduit adapter kit 70-228-01
Interface Accessories
Accessory Part number
RGB 580xi 60-362-01
RGB 580xi AAP 3' (black) 70-128-02
RGB 580xi AAP 6' (black) 70-129-02
RGB 580xi AAP 12' (black) 70-130-02
RGB 580xi I AAP 12' (black) 70-133-02
RGB 580xi S AAP 3' (black) 70-134-02
RGB 580xi S AAP 6' (black) 70-135-02
RGB 580xi SI AAP 3' (black) 70-137-02
RGB 580xi SI AAP 6' (black) 70-138-02
Top Plate Dimensions
The preferred and recommended method for cutting the table is
to use the metal routing template (figure A-2 and chapter 2,
“Installation”) and a router. The template, part # 70-191-01, is
available at no cost.
USER ACCESS
EXTRON ELECTRONICS
USER ACCESS
Figure A-2 — HSA 822 metal routing template
If you choose not to use Extron’s metal routing template, the
cut-out template (figure A-3) will help you properly prepare the
mounting surface. The cut-out template is not to scale and is
for reference only
. The surface cut-out area dimensions for the
template are marked in bold type.
For a full size paper template, visit the Extron Web site
(http://www.extron.com) or call the Extron S
3 Sales & Technical
Support Hotline.
A-5