C2rps-psm specifications, C2rps-psm redundant power supply output connector, C2rps‐psm specifications – Enterasys Networks C2RPS-SYS User Manual
Page 32: C2rps-psm, Specifications
C2RPS-PSM Specifications
A-2 Specifications
C2RPS-PSM
Specifications
Refer to
for the input/output port specifications.
C2RPS-PSM Redundant Power Supply Output Connector
For pin location and function, refer to
and
, respectively.
Figure A-1 C2RPS-PSM Redundant Power Supply Connector Pin Locations
Table A-2 C2RPS-PSM
Specifications
Item
Specification
Electrical
AC Input Frequency Range
AC Input Voltage Range
Output Voltage
Output Current
Maximum Output Power
47 - 63 Hz
85 - 264 Vac
12 Vdc
1.0 A min., 8.5 A or 13.0 A max.
102 W or 156 W continuous
Physical
Dimensions
19.6 H x 5.2 W x 25.7 D (cm)
7.7 H x 2.04 W x 10.1 D (in.)
Net Weight (Unit Only)
Gross Weight (Packaged Unit)
1.75 kg (3.85 lb)
3.20 kg (7.04 lb)
MTBF
300,000 Hours
Note: The following information is for troubleshooting purposes only. For proper operation,
do not use any other cable except the C2RPS-PSM Cable. This cable is specially
designed for this application and meets all necessary Regulatory and Safety standards.
The use of non-approved cables will void your warranty.
1
7
8
14