Ego Technology 4000 Plus - Manual (Page 8)

E G O 4 0 0 0 P L U S O P E R A T I O N M A N U A L
15
OPERATING INSTRUCTIONS
continued
1. Stop playback by pressing STOP button.
2. Press MODE button until “INTRO” indicates
on the display.
3. Press PLAY/PAUSE button, and Intro Scan
starts at once from the first track.
4. To cancel Intro Scan, press STOP button.
SHUFFLE PLAY
You can have the player play all tracks randomly
with the Shuffle Play feature. Follow the steps
below to initiate Shuffle Play:
1. Stop playback by pressing STOP button.
2. Press MODE button until “SHUFF” indicates
on the display.
3. Press PLAY/PAUSE button, and Shuffle Play
starts at once.
4. To cancel Shuffle Play, press STOP button.
PROGRAMMED PLAY
You can program up to 99 tracks to play in any
order you choose. The same track can be pro-
grammed for more than once.
TO PROGRAM A CD/MP3
PLAYBACK SEQUENCE:
CD
1. Stop playback by pressing STOP button.
2. Press EQ/PROG button until “PROG” indicates
on the display along with “PROGRAM: 01”.
3. Press SCAN UP/DOWN button repeatedly to
find the track to be programmed.
4. Press EQ/PROG button again to save it as
“PROGRAM: 01” then PROGRAM: 02” etc.
5. Press PLAY/PAUSE button to play the
programmed track while “PROG” is shown on
the LCD display.
6. Repeat steps 1 to 5 to program all tracks up
to 99 tracks.
MP3
1. Stop playback by pressing STOP button.
2. Press EQ/PROG button until “PROG” indicates
on the display along with “PROGRAM: 01”.
3. Press ALBUM button to select the desired
directory.
4. Press SCAN UP/DOWN button repeatedly
to find the track to be programmed.
5. Press EQ/PROG button again to save it as
“PROGRAM: 01” then PROGRAM: 02” etc.
14
OPERATING INSTRUCTIONS
continued
SPECIFYING A TRACK
CD
To select a desired track, press SCAN UP/DOWN
button repeatedly until the desired track is
found. The LCD display will show the track
number as you search.
MP3
While MP3 disc is playing, you may
1. Press SCAN UP button repeatedly to skip
forward to choose the track or directory
desired. Playback will begin automatically.
2. Press SCAN DOWN button once to skip
backward to the beginning of the current
track. Press SCAN DOWN button repeatedly
to skip backward to choose the track or
directory desired. Playback will begin
automatically.
When MP3 playback is stopped but power is
still on, you may
1. Press SCAN UP/DOWN button repeatedly
to find out the desired directory or the track.
2. Press PLAY/PAUSE button to start play from
this track on.
NOTE: While playing, press SAS/+10 button to
skip forward for 10 tracks each time.
REPEAT PLAY
While playing a CD/MP3 disc, you may press
MODE button to activate one of three different
repeat settings. Each successive press of MODE
button changes the setting:
1. One-Track Repeat - During playback, press
MODE button until “REPT 1” indicates on
the display. The current track will be repeated
continuously.
2. One-Directory Repeat - During MP3 playback
only, press MODE button until “REPT DIR”
indicates on the display. The current directory
will be repeated continuously.
3. All-Track Repeat - During playback, press
MODE button until “REPT ALL” indicates on
the display. All tracks will be repeated
continuously.
INTRO SCAN
You can preview the first 10 seconds of each
track to conveniently search for your desired
track. Follow the steps below to initiate Intro
Scan playback: