Getting started, Setting parameters – Crivit Z30080 User Manual
Page 90
92 GB/MT
!
Setting parameters
#
Switch the device to
hold mode (see “Hold mode / Count
mode”).
#
Press the SET button
3
to switch to
entry mode.
Note: If you do not make an entry within 15 seconds, the de-
vice automatically switches to
hold mode.
#
STRIDE appears on the function bar
15
. The cm icon
16
and
the default 60 cm appear on the LCD screen. Press the MODE
4
and CLEAR
1
buttons to set the required stride length.
Note: The stride length can be set within a range of 10 to
225 cm.
Tip: Hold down the MODE
4
and CLEAR
1
buttons for ap-
prox. 3 seconds. This enables you to make the settings faster. You
can also use this faster setting option for subsequent settings.
#
Confirm your entry by pressing the SET button
3
. WEIGHT
appears on the function bar
15
. The kg icon
16
and the de-
fault 60 kg appear on the LCD screen. Press the MODE
4
and CLEAR
1
buttons to set the required weight.
Note: The weight can be set within a range of 30 to 135 kg.
#
Confirm your entry by pressing the SET button
3
. Time
24
and
(24-hour format) and / or
(12-hour format)
light up. Press the MODE
4
and CLEAR
1
buttons to set the
required time format.
Note: The PM icon
20
stands for afternoons in 12-hour format.
Getting started
Getting started
54421_Z30080_Schrittzaehler_Content_LB5.indd 92
21.09.10 12:47