Getting started, Viewing the weekly record – Crivit Z30080 User Manual
Page 94
96 GB/MT
!
Viewing the weekly record
For this function, the device must be in
count mode (see “Hold
mode / Count mode”).
Note: The pedometer stores the distance covered and the calories
burned for the current week of training. You also have the option
of viewing separate training days.
Note: The record for a week always starts on a Monday. Please
note that all the data recorded in the week is always deleted at
midnight on Sunday.
Note: The current daily records are automatically stored in the
weekly record every day at midnight and reset to 0.
Note: Either the large CR2032 battery or the small LR44 batter-
ies are used to store the data. All the stored data are erased if all
the batteries are out of the device at the same time.
#
Press the FUNC button
2
to switch to
function mode. DAY
appears on the function bar
15
. The km
16
and kcal
18
icons
and the corresponding data for the entire week of training
appear on the LCD screen.
#
Press the MODE button
4
to switch from one training day to
the next. The km
16
and kcal
18
icons and the corresponding
data for each of the training days appear on the LCD screen.
Note: The days of the week are represented by numbers
(see “Setting the day of the week”). If no number appears
Getting started
Getting started
54421_Z30080_Schrittzaehler_Content_LB5.indd 96
21.09.10 12:47