Getting started, Using the panic alarm, Troubleshooting – Crivit Z30080 User Manual

Page 98

Advertising
background image

100 GB/MT

!

Using the panic alarm

#

The alarm is triggered when the panic alarm plug

14

is pulled

out of the device.

#

Pull out the panic alarm plug

14

on the wrist strap to

trigger the panic alarm.

#

Insert the panic alarm plug

14

back into the device to switch

off the panic alarm.

Note: Four new LR44 batteries will sound the panic alarm for
about five minutes. We recommend that you test the panic alarm
briefly when you wish to use the pedometer. Replace the four
LR44 batteries without delay if the low battery state indicator

26

illuminates.

!

Troubleshooting

= Error

= Cause
= Solution

The radio does not respond.

There may not be a signal in your present location.
Change your position.

Getting started

54421_Z30080_Schrittzaehler_Content_LB5.indd 100

21.09.10 12:47

Advertising