Crivit Z31222 User Manual

Page 89

Advertising
background image

89

GB/MT

Counting the number of hills (HILL)

Press the SELECT button 2 in altimeter mode until the display „HILL“

appears. The number of hills appears in the bottom area of the display,
the current altitude appears in the middle.

Press

3

Hold the SET button 3 pressed down to reset the number of hills to 0.

“HOLD TO RESET” appears in the display

Record

Press the SELECT button 2 in altimeter mode until the display

„RECORD“ appears. The current altitude appears in the bottom area
of the display, the graphic altitude display appears in the middle. The
altitude variation and graphic display record the change in altitude
within the last 8 hours.

Press thee SET button 3 to recall the altitude record for a specific

location during the last 8 hours. The time of recording is displayed for
every single altitude record.

Hold the SET button pressed down to start a new altitude recording.

“HOLD TO RESET” appears in the display

Advertising
This manual is related to the following products: