Energy Speaker Systems LTV46DA - Manual (Page 18)

16
Settings
1 Press the mains switch on the back of the unit.
2 Press the remote control. This switches the unit on and it can be operated using the remote control.
➣
Stand by
1 Press on the remote control.
➣
Switch Stand by Off
1 Press the mains switch on the back of the unit..
Now the unit is switched off completely and does not consume any power.
You can adjust various settings of the unit to adapt it to your requirements.
Settings
Switching On
Setting up for Operation
Switching Off
By default, the unit is set to the English language. For information on how to
change the on-screen language later, refer to: “Set Screen Language” on page 24.
Please note that the unit also consumes a little power when in stand by mode.
If it is not explicitly stated otherwise, it will be assumed that the unit and the
TV set are switched on and will be operated by the remote control.
1027_A50-095300_Eng 10/27/06 9:44 PM Page 16