Open, select and close menus tuning, Starting automatic tuning tv stations, Settings – Energy Speaker Systems LTV46DA User Manual
Page 19
¥Position
OK: Select
MENU/EXIT: Exit
Mode
Brightness
Contrast
Sharpness
Colour
Tint
Colour Temperature
Standard
050
050
050
050
050
Picture Audio Timer Install Setup Option
English
17
Open, Select and Close Menus
Tuning
You only need to tune the TV channels, if the device is connected to a roof aerial.
If you use a satellite receiver, a decoder or a similar device, the signal of this
device will be shown. Press and select the desired device.
Settings
The settings of the unit are accessible via menus. To navigate in the menus proceed as follows:
1 Press .
The main menu opens. The submenu
selected last will be displayed.
2 If necessary, press to return to the
main menu.
3 Press ¥ or to select the desired menu.
Or
4 Press or to select the desired sub menu.
5 Press ¥ or to set the desired sub menu.
6 Press to move one menu level up.
7 Press or to select the desired setting.
8 Press to activate the desired setting.
9 Press to save the settings.
➣
Starting Automatic Tuning TV Stations
Use this feature to start automatic tuning. The TV channels will be tuned and stored. Later you can
rearrange the sorting of the TV channels as you wish.
1027_A50-095300_Eng 10/27/06 9:44 PM Page 17