Energy Speaker Systems LTV46DA - Manual (Page 36)

Position OK: Select MENU: Previous EXIT: Exit
Language
Geometry
Aspect
No WSS
Favourite Channel
PIP Adjustment
Factory Preset
English
Auto
Full
Picture Audio Timer Install Setup Option
! Warning
Yes No
¥Š
Move OK: Select MENU: Previous EXIT: Exit
Local Lock
OSD Setting
No Signal Power Off
No Operation Power Off
Noise Reduction
Teletext Character Group
Off
20
180
On
West Europe Teletext Character Group
West Europe
East Europe
Cyrillic
¥Š
Picture Audio Timer Install Setup Option
Set Characters for Teletext
34
Settings
Restore Default
Settings for the Computer
➣
Deactivate Child Lock
To deactivate child lock, proceed as described in chapter “Activate Child Lock” on page33 and select OFF.
Use this function to set the character set for teletext to your region.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or Š and select OPTION.
3 Press ›or ‚ and select TELETEXT
CHARACTER GROUP.
4 Press ›or ‚ and select the character set.
5 Press to save the settings.
The following settings are available :
Western Europe, Eastern Europe, Cyrillic
Use this function to set all settings you have made back to the default factory setting.
1 Press . To return to the main menu, press
several times.
2 Press ¥ or Š and select SETUP.
3 Press ›or ‚ and select FACTORY PRESET.
4 Press .
5 Press the mains switch on the back of the unit.
If you are using the unit as a monitor for your computer make the applicable settings accordingly. Set the
resolution to 1024 X 768 and the frequency to 60 Hz.
1027_A50-095300_Eng 10/27/06 9:45 PM Page 34