Energy Speaker Systems LTV46DA - Manual (Page 42)

Use this function to set the sound effects.
1 Press .
2 Press again to switch the sound effect off.
For further information on the settings refer to: “Adjust Medium and Low Frequencies” on page 28.
Use this function to adjust the sound optimally to the content.
1 Press until the desired mode is displayed.
For further information on the settings refer to: “Adjust Individual Audio Frequencies” on page 28.
Use this function to turn the stereo sound on or off.
1 Press .
The displays/controls the processing and output of the audio signal. When power is switched on, the
mode is automatically preset to stereo or dual, depending on the current transmission.
For further information on the settings refer to: “Sound Settings” on page 21.
40
Watching
Set Sound Effect while Watching
Set Sound while Watching
Set Stereo/Mono while Watching
1027_A50-095300_Eng 10/27/06 9:45 PM Page 40