Electrolux ETV45000X - Manual (Page 19)

English - 18 -
Switching the TV on/off
To switch the TV on
• Your TV will switch on in two steps.
• Connect the power cord to 220-240V AC 50
Hz. Press stand-by button. Then the TV
switches itself to stand-by mode (Optional).
• To switch on the TV from stand-by mode
either:
• Press a digit button on the remote control so
that a channel number is selected, or press
the -P/CH or P/CH+ button on the TV or press
the P/CH+ or P/CH- button on the remote
control, so that last mode switched off is
selected. By either method the TV will switch
on.
To switch the TV off
• Press the “ (stand-by)” button on the
remote control or stand-by button on the TV,
so the TV will switch to stand-by mode.
• To power down the TV completely, unplug
the power cord from the mains socket.
Input selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press the AV button on your remote control
until the desired source is highlighted. The
TV will then switch to the selected source
after a short while.
Source
TV
EXT1
PC
YPBPR
HDMI
DTV
ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:06 18