Electrolux ETV45000X - Manual (Page 20)

English - 19 -
Basic operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume setting
• Press - button to decrease volume or
+ button to increase volume, so a volume
level scale (slider) will be displayed on the
screen.
Programme selection
• Press P/CH + button to select the next
programme or P/CH - button to select the
previous programme.
Entering main menu
• Press the MENU button to enter main menu.
In the Main menu select sub-menu using P/
CH - or P/CH + buttons and enter the sub-
menu using
- or + buttons. To learn
the usage of the menus, refer to the menu
system sections.
AV mode
• Press the TV/AV button at the control panel
on the TV to switch your TV to AV modes.
Operation with the remote control
• The remote control of your TV is designed to
control all the functions of the model you
selected. The functions will be described in
accordance with the menu system of your
TV.
• Functions of the menu system are described
in the following sections.
Volume setting
Press V + button to increase the volume.
Press V - button to decrease the volume. A
volume level scale (slider) will be displayed
on the screen.
Programme selection (Previous or
next programme)
• Press P - button to select the previous programme.
• Press P + button to select the next programme.
Programme selection (Direct access)
•Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 - 999 (for
IDTV) or 10-99 (for analogue), press the
numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the first digit programme
will be displayed. The limit of the delay time
is 3 seconds.
• Press directly the programme number to
reselect single digit programmes.
ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:06 19