Electrolux ETV45000X - Manual (Page 37)

English - 36 -
Standard
Select Standard by pressing / button. Use
/ button to change the standard to B/G,
D/K, I or L/L'.
Colour system
Select Colour System by pressing / button.
Use
 /  button to change the colour system
to PAL, SECAM or AUTO.
Search
Select Search by pressing / button. Press
 /  button to start search. The search will
stop when a signal is found.
Note: If you press the buttons with one-step moves,
a frequency of 0.25 Mhz will be advanced.
However if you press the buttons all at once, it
will advance automatically. To stop searching
at a certain time, you may press / buttons.
VCR Mode
Select VCR Mode by pressing / button.
Use
 /  buttons to set VCR Mode as On or Off.
Hint: If you want to watch a DVD , then you
have to set this item as Off.
Decoder
You can use this mode to connect any decoder to
your TV.
Select Decoder by pressing / button. Press
the
 /  buttons to turn it On or Off.
When you switch the Decoder setting to Off,
EXT-1 output will be muted. In this case, EXT-
1 output will not be available to display video.
If it is switched on, the EXT-1 output will be the
selected video source. Any decoder can be
connected to EXT-1 to unscramble required
video signals.
Hint: Decoder setting should be stored separately
for each programme.
Store
Select Store by pressing  /  button. Press
 or OK button to store the settings. “Stored”
will be displayed on the screen.
A.P.S.
Select A.P.S. by pressing

/  button. Press
button to enter the A.P.S. submenu:
Auto. Programming System
Country U.K.
Warning! All prestored programs
will be deleted
Start : Ok
Back : Menu Exit : TV
A.P.S. country
Press / button to set your country..
If you want to exit from A.P.S. function, press
the
TV DTV
button. For going back, press M.
When you press OK button for starting APS,
all stored programs will be erased and the
following screen will be displayed:
Auto. Programming System
Automatic tuning runs at: 78 %
State: Fine scanning ...
Exit : TV
Whenever you press the
TV DTV
button, A.P.S.
function stops and program table appears on
the screen.
If you wait until the end of A.P.S., Program Table
is displayed with the programmes found and
located.
ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:07 36