Electrolux ETV45000X - Manual (Page 25)

English - 24 -
Navigating the entire channel list
Press or button for selecting the previous
or next channel. You can press RED or GREEN
button to move page up or page down.
To watch a specific channel, highlight it using
or button and then press OK button, while
the “Select” item on Channel List menu is
highlighted by using or
button.
Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.
Deleting the channels in the channel
list
Press or button to select the channel
that will be deleted.
Press or button to select the “Delete’’
item on Channel List menu. As seen on
Channel List menu, SELECT is displayed next
to Delete item at the bottom of the screen to
indicate that you must press the OK button to
delete the highlighted channel in the channel
list.
SELECT i SELECT
CHANNEL LIST 1 BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select Delete Edit Name Lock Favourites
Function Select Channel Delete More
Press the OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:
The selected service will be permanently
deleted. Are you sure?
Yes No
Press or button to highlight the desired
option. If OK button is pressed while “Yes” is
highlighted, the highlighted channel is
deleted. Selecting “No” cancels the deletion.
Renaming channels
To rename a specific channel, the channel
must be highlighted by pressing
or
button. Then highlight the Edit Name item by
pressing or button as illustrated below..
Press the OK button to activate the rename
feature.
SELECT i SELECT
CHANNEL LIST 1 BBC ONE
1. BBC ONE
2. BBC TWO
3. ITV 8
4. Channel 4
5. BBC THREE
6. Teletext
7. BBC FOUR
8. Sky Travel
9. UKHistory
10. RTL
Select Delete Edit Name Lock Favourites
Function Select Channel Edit Name More
Now pressing or button moves to the
previous/next character. Pressing or
button toggles the current character, i.e., ‘b’
character becomes ‘a’ by
and ‘c’ by .
Pressing the numeric buttons ‘0...9’ replaces
the highlighted character with the characters
printed above the button one by one as the
button is pressed.
Press the M button to cancel the editing or OK
button to save the new name.
Adding locks to channels
Channel locking provides a password-
protected access to channels selected by
parents. In order to lock a channel you should
know the parental lock password (default
value is set to 0000 in the factory and can only
be changed from the Configuration menu).
Select the channel to be locked by highlighting
it and select the Lock option by pressing or
ENG-19796W-1050UK-17MB24H-IDTV-(BACK LINE OUT-YPbPr-WO SVHS)-LIPS-50118956.p65 25.04.2008, 10:06 24