Efficient Networks 5800 - Manual (Page 11)

Efficient Networks
®
5800 Series
User Reference Guide
Chapter 1: Installation
Efficient Networks
®
Page 1-3
Connecting Your Router
1. Place your router in a location where it will be well ventilated. Do
not stack it with other devices or place it on carpet.
2. Connect your PC directly to any of the router’s four Ethernet ports,
using one of the red straight-through cables. You may also connect
one to seven additional Ethernet devices to the router’s built-in
Ethernet hub.
3. Connect your router to the DSL jack using the remaining Ethernet
10Base-T, RJ-45 cable.
4. Connect the router to an AC power outlet using the power cord.
The following diagram shows an Efficient Networks 5800 Series Business Class
Router when fully connected:
CAUTION:
To reduce the risk of fire, use only no. 26 AWG or larger
telecommunications line cord. This cord is used to connect your DSL port
on your router to the telephone jack.
Figure 1-1: 5800 Series Router Fully Connected
CONSOLE