Efficient Networks 5800 - Manual (Page 12)

Chapter 1: Installation Efficient Networks
®
5800 Series
User Reference Guide
Page 1-4 Efficient Networks
®
Configuring Your Computer
1. Configure the TCP/IP protocol stack on your computer to obtain an
address automatically from the router. To do so with a PC running
Windows 9x or NT, select Start > Settings > Control Panel > and
click on Network.
2. Select the Configuration tab at the top of the dialog. Users with
Windows NT select the Protocols tab.
3. From the list of network components, select TCP/IP.
4. Click on the Properties button.
5. Select the IP Address tab.
6. Ensure that “Obtain an IP Address Automatically” is selected.
Users of Windows NT should select “Obtain an IP Address from a
DHCP server”.
7. Click OK as needed to confirm your settings, and reboot your
computer.
Figure 1-2: MS Windows TCP/IP Properties Dialog