Ecom Instruments Ex-CDMA 02 - Manual (Page 29)

28
Setting the roam ringer
You can set a ringer to indicate when an incoming call will be subject to
roaming charges.
. Select Menu ‡ Settings ‡ Sounds ‡ Roam Ringer.
2. Highlight Enabled and press
. You‘ll hear a sample of the ringer.
3. Press
to set the ringer.
Setting Call Guard to avoid roaming calls
You can set your phone to warn you before you answer or place a call while
roaming.
• Select Menu ‡ Settings ‡ Convenience ‡ Call Guard ‡ Call prompt.
The phone makes a distinctive ring to indicate an incoming call while you are
roaming, and you must press
to accept the call or to place a call while
roaming.
Controlling network roaming
Specifying digital or analog mode
You may force the phone into either digital or analog mode. This is useful if
you are in an area that borders on digital service and the automatic feature is
causing the phone to keep switching between modes.
. Select Menu ‡ Settings ‡ Network ‡ Digital/Analog.
2. Select an option and press
.
- Automatic automatically switches the phone between digital and analog.
- Analog only sets the phone to work in analog mode only.
- Analog call forces a call into analog mode for the duration of the next
call.
- Digital only sets the phone to work in digital mode only.
Turning roaming on or off
This setting allows you to control the phone‘s roaming feature by specifying
which signals the phone will accept.
. Select Menu ‡ Settings ‡ Network ‡ Roam Option.
2. Select an option and press
.
- Automatic (recommended setting) accepts any system the phone ser-
vice provides.
- No Roaming prevents you from making or receiving calls outside of
your home service area.
Note: If your phone has more than one setting for Automatic, contact Verizon
Wireless to determine which one to use.