Ecom Instruments Ex-CDMA 02 - Manual (Page 51)

50
Erasing all contacts
. Select Menu ‡ Settings ‡ Security.
2. Enter your four-digit lock code.
3. Select Erase Contacts.
4. Select Yes to erase all contacts. A message appears: „Erase ALL
contacts?“
5. Select Yes to erase all contacts.
Setting message alerts
You can choose how you want to be alerted of incoming voicemail, pages, or
text messages.
. Select Menu ‡ Settings ‡ Msg Settings ‡ Alerts.
2. Select the type of alert: Message Alert, Net Alert, Page Alert, or Voice-
mail Alert.
3. Press to select an option:
- Vibrate, Beep, Hiya!, Rock!, or Happy - Set the phone to vibrate, beep, or
play a tune once when a new message is received.
- Options with remind - Set the phone to notify you once when a new
message is received and then notify you again every five minutes. To stop a
reminder alert, press
to select Ignore.
- Disabled - Turn off message alerts.
Setting alerts for your headset
When a headset (not usable in hazardous area) is attached to the phone, you
can set alert sounds to originate from the headset.
. Select Menu ‡ Settings ‡ Accessories ‡ Headset Ring.
2. Select Out of headset to have alerts originate from the headset.
Network settings
Switching between phone lines
Your phone can have two service accounts, or phone lines, associated with
it. Each phone line has its own phone number. When you are using one line,
you cannot receive calls from the other.
It would be as if the phone were „off“ for that number. Your voicemail, ho-
wever, will still take messages. All contacts and settings are shared for both
lines.
Note: Before you can switch between phone lines, you must first establish
a second phone line with Verizon Wireless. Once it has been established, a
second phone number becomes available in the menu for selection.
. Select Menu _ Settings _ Network _Set Phone Line.
2. Select the other line and press
.