Eltax Cinema DVD Home Theatre System Vision DVD Home Theatre System - Manual (Page 10)

Connection terminals for this DVD receiver
are found on the rear panel. Read carefully
and follow the manufacturers' instructions
of any video and audio device being
connected to this unit.
Do not connect the power until all connections
have been properly completed.
Red terminal (marked R) is for connecting the
right channel. The white terminal (marked L)
is for connecting the left channel. The yellow
terminal is for video connection. Make sure
all connections are securely made. Improper
connections may cause noise, poor perfor-
mance, or cause damage to the equipment.
Do not tie the AV cord with any other cords,
such as the power cord or speaker wires, as
it may result in poor picture and/or sound
quality.
CONNECTING
DEVICES
9
230V ~50Hz
OPTICAL OUTPUT OUTPUT
L L SW SW COAXIAL
S-VIDEO VIDEO R
RECORDER
Active
Subwoofer(Optional)
CD