Eltax Cinema DVD Home Theatre System Vision DVD Home Theatre System - Manual (Page 24)

23
SYSTEM SETUP
In the More Audio menu the following settings can be made: Prologic,
Subwoofer, Test Tone, DRC and LPCM settings.
Prologic settings:
This unit features an integrated Dolby Prologic decoder that can give you a
virtual surround sound experience.
A.
When the disc has stopped, press SETUP.
B. Select and press ENTER.
C. Select Prologic and press ENTER.
D. Select the desired Prologic setting and press enter.
OFF (Default): The Dolby Prologic decoding function will
always be deactivated.
ON: Dolby Prologic will always be activated.
E. Press SETUP to save and exit the setup menu.
Subwoofer settings:
In the setup menu it must be indicated whether a subwoofer is connected to the
system or not (indicated by the figure 1 in 5.1):
A.
When the disc has stopped, press SETUP.
B. Select More Audio and press ENTER.
C. Select Subwoofer and press ENTER.
D. Select the desired subwoofer setting and press ENTER.
ON (Default): A passive or an active subwoofer is connected
to the unit for reproduction of LFE (Low Frequency Effect)
signals.
OFF: No subwoofer is connected to the unit.
E. Press SETUP to save and exit the setup menu.
Prologic
Subwoofer
Test Tone
DRC
LPCM On On
Off
On
Off
Off
96k
Language Video Audio Rating More Aud
On
Off
Language Video Audio Rating More Aud
Prologic
Subwoofer
Test Tone
DRC
LPCM On
On
Off
Off
96k
Others Others
Follow these instructions to set the analog and digital
output signals when you wish to play other audio tracks:
A. When the disc has stopped, press SETUP.
B. Select Audio and press ENTER.
C. Select Others and press ENTER.
D.
Set Analog Out to:
5.1 Channel (Default): For Dolby Digital playback in the original format, i.e. sound
through all outputs.
2 Channel: For downmixing of a 5.1 signal, i.e. stereo sound.
E. Set Digital Out to:
PCM (Default): For transmitting a 2-channel stereo signal through the digital
outputs (Optical/Coaxial) to e.g. a minidisc or a CD recorder.
RAW: For transmitting the raw 5.1 channel digital bitstream signal through the
digital outputs (Optical/Coaxial) to e.g. an external digital surround receiver.
Off: For deactivation of the digital outputs.
F. Press SETUP to save and exit the setup menu.
Language Video Audio More Aud Rating
Digital Out
PCM
PCM
PCM
Analog Out
5.1 channel
5.1 channel
5.1 channel PCM
Raw
Off AC3
MP3/WMA
Others
5.1 channel
2 channel
Off
MP3/WMA settings
Follow these instructions to set the digital output signal
when you wish to play Mp3 tracks.
(Note: The analog format is locked to stereo):
A.
When the disc has stopped, press SETUP.
B. Select Audio and press ENTER.
C. Select MP3 and press ENTER.
D. Set Digital out to:
PCM (default): For transmitting a 2-channel stereo
signal through the digital outputs (Optical/Coaxial)
to e.g. a minidisc or a CD recorder.
Off: For deactivation of the digital outputs.
E. Press SETUP to save and exit the setup menu.
5.1 channel
2 channel
Off
Language Video Audio More Aud Rating
Digital Out
PCM
PCM
PCM
Analog Out
5.1 channel
5.1 channel
5.1 channel PCM
Raw
Off Ac3
MP3/WMA
Others
More Audio Setup