Eltax Cinema DVD Home Theatre System Vision DVD Home Theatre System - Manual (Page 7)

6
FRONT AND
BACK PANELS
Front Panel Functions
Back Panel Functions
1. ANTENNA
For connection of the supplied AM and FM
antennas.
2. AUX IN
For connection of external accessory
equipment, such as a CD player.
3. AUDIO OUT
For connection of an external amplifier if you
wish to hear the sound in another room.
4. VIDEO OUTPUT
5. S-VIDEO OUTPUT
6. REAR
For connection of rear speakers.
7. FRONT/MAIN
For connection of front speakers.
8. CENTER/SUBWOOFER
For connection of center speaker and
subwoofer.
9. COAXIAL OUTPUT
10. 230V~50Hz
This unit is supplied with a power cord. Make
sure that the pins are dry before inserting the
plug into a wall socket. Do not pull the cord or
step on it.
11. SCART INPUT/OUTPUT
12. OPTICAL OUTPUT
13. OUTPUT FOR ACTIVE SUBWOOFER
For connection of an active subwoofer.
.
1 POWER
All connections must be checked before the
mains plug is inserted into the socket. Then
insert the mains plug carefully into the socket.
Press the POWER button on the front panel to
turn on the unit. When the power is turned on for
the first time, a short surge may disrupt the
function of other electronic equipment in the
same circuit. If so, connect the unit to a wall
socket of another circuit.
2. OPEN/CLOSE
This button is used to open and close the DVD
tray.
3. PLAY/PAUSE /AUTO
This button is used to start and pause playback
in DVD mode.
When the unit is in TUNER mode, the button can
be used to initiate an automatic channel search
4. PREV/DOWN
This button is used to select the previous track
when the unit is in DVD mode.
In TUNER mode it can be used to initiate a
manual search at lower frequencies.
5. NEXT/UP
This button is used to select the next track when
the unit is in DVD mode.
In TUNER mode it can be used to initiate a
manual search at higher frequencies.
6. INPUT SIGNAL SOURCE
This button is used to select the input source.
Note: You may not hear any sound if the input
selected has not been connected to any unit.
7. VOLUME
This button is used to adjust the volume of all six
channels simultaneously.
6 7
10
2 4 5 8
9
11 3 12
1
230V ~50Hz
OPTICAL OUTPUT OUTPUT
L L SW SW COAXIAL
S-VIDEO VIDEO R
13
1 4 2 3 5 7 6