Eva Solo LX-90TM - Manual (Page 13)

If you are using a word processing or other applications program
and your printing is too high or too low on the page, change your top
of page setting.
Once you have set the top of page, each time you finish printing a
document, push the ON LINE button to put the printer off-line and
then push the FF button once to advance the paper so that you can tear
off your just-printed pages and the paper will be in the right position
to begin the next document.
Unless you want to use single-sheet paper, you’re now ready to
print with your new Your PIC manual tells you how to get the
most from your new printer and how to take advantage of your com-
puter’s printing capabilities.
Removing the Tractor Unit
When you want to use single-sheet paper in your you can
remove the tractor unit quite easily. Just push back the two tractor
release levers (one of them is shown below), tilt the unit backward,
and lift it up.