Eva Solo LX-90TM - Manual (Page 14)

Loading Single-Sheet Paper
1. First, make sure that the printer is turned OFF. Open the front lid,
push the friction lever back, and pull the paper bail forward.
2. Now slide the ribbon carriage manually to the center of the printer
and feed the paper into the paper slot in the top of the printer as
shown below.
Friction lever
Front lid
3. When the paper won’t go any further, turn the paper feed knob to
advance it (just like on a typewriter). Turn the knob until the top of
the paper fits under the paper bail, then push the bail against the
paper. If the paper becomes crooked, don’t worry; just pull the
friction-release lever forward, straighten the paper, and push the
friction lever back.
And that’s all there is to loading single-sheet paper. You’re now
ready to print with your printer. See your PIC manual for fur-
ther instructions.
11