Emerson HK250 - Manual (Page 15)

15
BASIC OPERATION (CONTINUED)
PAGING THE HANDSET
Press the PAGE button on the base to
locate the handset when not in use;
the handset will ring with three short
beeps and the TALK button will blink.
“Page” will appear in the display on the
LCD during paging.
1
FINDING THE HANDSET
Press and hold the PAGE button on
the base for more than three seconds
to locate the handset when not in use;
the handset will ring for 30 seconds
repeating sequences of three short
beeps. Press the TALK button to end
the page function.
1
USING THE TONE BUTTON
If you are in a Pulse dialing area you
may still take advantage of touch-tone
services after dialing to respond to
touch-tone prompts. To do this, press
the */TONE/➛ button to temporarily
change the dialing mode from Pulse to
Tone after dialing in the Pulse mode.
This will enable Pulse users to access
touch-tone services. It will revert back
to Pulse after hanging up.
1
CALL WAITING
If you subscribe to Call Waiting through
your local phone company, and you
receive another phone call, the phone
will alert you with a beep and the display
will show the name and number. Simply
press the FLASH button to answer the
new call. Press the FLASH button again
to return to the original call. Call Waiting
Caller ID also needs to be subscribed to
in order to see the new caller’s
name/number on the display if you are
already on the phone.
1
NOTE:
When an incoming call is received while paging and the RINGER switch is set to
the ON position, the Page mode will be terminated and the incoming ringer will
start.
HK250.O/M.QXD 9/26/02 3:49 PM Page 15