Emerson HK250 - Manual (Page 18)

18
BASIC OPERATION (CONTINUED)
DIALING A NUMBER IN THE CALLER ID DISPLAY
You can automatically call a number from the caller ID log as follows:
Scroll through the calls to select a
number to dial by pressing the CID
button ❶ and then scroll by pressing
the REVIEW/VOLUME /❷ buttons
❷
.
2 1
2
1
Press the CID button again to dial the
number.
2
DELETING ONE NAME/NUMBER FROM THE CALLER ID LOG
Scroll through the calls to select a
number to delete by pressing the CID
button ❶ and then scroll by pressing the
REVIEW/VOLUME /❷ buttons ❷.
2 1
2
1
Press the PROG button ❶ then press
the ERASE button ❷ ; “DELETED” will
appear in the display and a confirmation
tone will be heard.
1
2
2
DELETING ALL NAME(S)/NUMBER(S) FROM THE CALLER ID LOG
Press the CID button.
1
Press the PROG button ❶ then press
the ERASE button ❷; “DELETED” will
appear in the display and a confirmation
tone will be heard.
1
2
2
HK250.O/M.QXD 9/26/02 3:49 PM Page 18