EXP Computer ThinCom PCMCIA Ethernet Modem Adapter User Manual
Page 13
INSTALLATION
INSTALLATION
- 9 -
ENABLING 32-BIT CARD SUPPORT IN WINDOWS 95
To check whether your computer is PCMCIA Socket supported, first, double-click on the
ASystem@ icon from AControl Panel@ folder (you can select the AControl Panel@ under ASettings@ from the AStart@ menu
to open the
AControl Panel@ folder).
Click on the Device Manager Tab. If
APCMCIA Socket@ has a cross (X) sign next to the PCMCIA Controller as show above, it means the PCMCIA device driver is not using 32-Bit Card Support. The socket(s)
is not enabled at this time and there should be only one such a line displayed. In this case, double click on the PCMCIA Controller, and a dialog box will be displayed as below. Please place a check mark next
to the current configuration of Device usage box, then select OK.
After the PCMCIA 32-Bit Card support is installed, Windows will ask you to reboot your computer. Then you should repeat the install procedures.
If the PCMCIA Socket is not found, then you must add a PCMCIA socket to your system. Please click on the
AAdd New Hardware@ icon in the Control Panel folder and select APCMCIA socket@. Select the
appropriate type of PCMCIA Controller that matches with yours system and follow the on-screen instructions.