EXP Computer ThinCom PCMCIA Ethernet Modem Adapter User Manual
Page 30
APPENDIX A
APPENDIX A
- 26 -
\K3
Send break to remote modem immediately.
\K5
Send break to remote modem in sequence with transmitted data. When modem receives \B in on-line command state:
\K0,1
Clear buffers and send break to remote modem.
\K2,3
Send break to remote modem immediately.
\K4,5
Send break to remote modem in sequence with transmitted data.When modem receives break from the remote modem:
\K0,1
Clear data buffers and send break to DTE.
\K2,3
Send a break immediately to DTE.
\K4,5
Send a break with received data to the DTE.
\N0
Select normal speed buffered mode.
\N1
Select direct mode.
\N2
Select reliable link mode.
\N3
Select auto reliable mode.
\N4
Force LAPM mode.
\N5
Force MNP mode.
+MS
Select modulation
ECC COMANDS
%C0
Disable data compression.
%C1
Enable MNP 5 data compression.
%C2
Enable V.42 bis data compression.
%C3
Enable both V.42 bis and MNP 5 compression.
\A0
Set maximum block size in MNP to 64.
\A1
Set maximum block size in MNP to 128.
\A2
Set maximum block size in MNP to 192.
\A3
Set maximum block size in MNP to 256.
\Bn
Send break of n x 100 ms.
MNP 10 COMMANDS
)M0
Disable MNP 10 link negotiation power adjustment.
)M1
Enable MNP 10 link negotiation power adjustment.
*H0
Select MNP 10 link negotiation at highest rate.
*H1
Select MNP 10 link negotiation at 1200 bps.
*H2
Select MNP 10 link negotiation at 4800 bps.