EverFocus EDVR SERIES - Manual (Page 47)

4. ALARM OUTPUT
This will transmit a signal to another device. The setting of alarms are NONE = not
activated, 1 = output signal 1 transmitted, 2 = output signal 2 transmitted, 3 =
output signal 3 transmitted and 4 = output signal 4 transmitted. To change this,
simply use the Jog Dial on the DVR. (Only EDVR16D3 model has 4 alarm outputs, all
the rest models have only 1 alarm output).
5. ALARM
EMAIL
Select “YES” for sending an email when vloss occurs. The email address can be set in
the NETWORK SETUP MENU.
6. BUZZER: Audible alarm buzzer.
ENABLE: To enable a vloss buzzer.
DISABLE: To disable a vloss buzzer.
7. ALARM NETWORK:
YES: Enable alarm network.
NO: Disable alarm network.
8. SUMMARY
All video loss’s statuses are shown in SUMMARY tables. These tables are for checking
video loss overall statuses, but not for setting.
37