12 system setup menu – EverFocus EDVR SERIES User Manual
Page 72
3
3
.
.
1
1
2
2
S
S
y
y
s
s
t
t
e
e
m
m
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.24
Diagram 3.24 is a screen shot of the SYSTEM SETUP MENU. This menu is for setting up
any additional options and restoring defaults to the digital recorder. In the SYSTEM SETUP
MENU the following fields are defined as follows:
1. SYSTEM
VERSION:
Current system firmware version.
2. SYSTEM VIDEO FORMAT: NTSC or PAL. System can detect the input signal type
automatically from camera 1 while system is booting up. Users do not need to set it up.
Note: The signal type is detected by camera 1, so camera 1 input has to be connected.
3. LOAD/SAVE
CONFIGURATION:
YES: Turn the jog to enter the selection window, there are 4 options available: CANCEL,
DEFAULT, LOAD, and SAVE. Select “CANCEL” for leaving the existing window. Select
“DEFAULT” to load factory default values. Select “LOAD” to upload and save DVR
configuration settings from USB. Select “SAVE” to save existing DVR configuration
settings to USB device. Press “SELECT” button from the front panel to confirm once the
selection is made. Note that a USB device has to be inserted properly before choosing
“LOAD” or “SAVE” options. System will ask you to stop recording if you confirm to load
default setting, to load saved setting or to save existing setting when the system is
recording.
62