11 warning setup menu, Fan fault – EverFocus EDVR SERIES User Manual
Page 65
3
3
.
.
1
1
1
1
W
W
a
a
r
r
n
n
i
i
n
n
g
g
S
S
e
e
t
t
u
u
p
p
M
M
e
e
n
n
u
u
Diagram 3.20
Diagram 3.20 is a screen shot of the Warning Setup Menu. This menu is to set the warning
system settings. If any critical errors were to arise, this portion of the menu would be for error
handling. For example if you set the fan buzzer on and the fan wasn’t able to turn on then
you would here an alarm go off. In the Warning Setup Menu the following fields are defined
as:
3.11.1 FAN FAULT
In FAN FAULT, we define:
1. BUZZER:
Fan buzzer. To change this, simply use the Jog Dial on the DVR.
ENABLE: To enable a buzzer when the fan does not work.
DISABLE: To disable fan buzzer.
2. ALARM
OUTPUT
This will transmit a signal to another device. The setting of alarms are NONE = not
activated, 1 = output signal 1 transmitted, 2 = output signal 2 transmitted, 3 =
output signal 3 transmitted and 4 = output signal 4 transmitted. To change this,
simply use the Jog Dial on the DVR. (Only EDVR16D3 model has 4 alarm outputs, all the
rest models have only 1 alarm output).
55