Eclipse - Fujitsu Ten AVN7000 EN - Manual (Page 12)

- 12 -
MAIN UNIT 1
16P
GPS ANTENNA
TO GROUND
TO ACC
(Power Supply)
Red
TO HEAD LIGHT SWITCH
(Illumination (+) )
Orange/White
TO POWER ANTENNA RELAY
(Supply)
Blue
TO TURN-ON LEAD OF EACH UNIT
(Supply)
Blue/White
TO BATTERY+12V (Permanent Supply)
Yellow
H/A MUTE
TEL MUTE
Light Green
DIGITAL OUTPUT
Red/
White
Green
Purple/
White
NAVI MUTE
Brown
NO CONNECTION (Do
not remove cap)
13P
4P
NAVI OUTPUT
20P
1P
16P
INTERCONNECTING CABLE (E-lan etc) 4
Pink
Black
TO EXTERNAL VIDEO
EQUIPMENT
(remove cap when using
extenal VIDEO
EQUIPMENT)
If not connecting a device
such as a DCU105 (sold
separately), connect the
external amplifier or
another device to these
RCA cables.
BEC105
(sold separately)
REAR
SPEAKERS
FRONT
SPEAKERS
TO VEHICLE SPEED PULSE
SIGNAL TERMINAL
(Refer to page 10) TO PARKING BRAKE SIGNAL
(Refer to page 11) TO REVERSE SIGNAL
(Refer to page 11)
System connection e System connection e xample xample
AVN7000 + HDR105 + TVR105 + CH3083
INTERCONNECTING CABLE
(Speed pulse, parking, reverse,video, etc) 3
INTERCONNECTING CABLE
(Power and speaker connector)
2
• • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current
capacity of the power cable is exceeded, fire and electric shocks may result.
• • The cables should be secured with tape or a similar securing method to prevent any obstructions while
driving. If they get wound or entangled around components such as the steering wheel, shifting lever,
or brake pedal, accidents may result.
• • If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire
insulating method around the connection to insulate it. If the connection is not insulated, fire or
accidents may result.
14