Installation outside the vehicle (example) – Eclipse - Fujitsu Ten AVN7000 EN User Manual

Page 18

Advertising
background image

- 18 -

- Installation outside the vehicle (example) -

Choose an installation location where the GPS

antenna can be attached securely.

1

Remove the backing paper from the body

protective sheet and attach the sheet to the

vehicle.

2

Install the GPS antenna on top of the body

protective sheet.

3

Body protective
sheet (clear)

17

Route the GPS antenna cable to the main unit

while securing it with harness affixing tape.

7

GPS antenna

14

Front of vehicle

Route the GPS antenna cable inside the vehicle's

trunk and secure it with clamps.

4

Attach the waterproof cushion so that the GPS

antenna cable is flat against the weatherstrip

when the trunk lid is closed.

5

Route the GPS antenna cable while securing it

with cable ties.

6

Waterproof cushion

Front of vehicle

Front of vehicle

Weatherstrip

Route to
main unit

15

To aid in sliding the waterproof cushion in finding

the desired mounting location, apply plain or

soapy water to the waterproof cushion.

Tip

Cut the harness affixing tape into usable lengths

with scissors. Do the same for the rest of the

installation.

Tip

Harness affixing tape

20

Harness affixing tape

20

Advertising