Before fi rst use, Charging the appliance, Assembly/disassembly – Silvercrest SHSS 12 B2 User Manual

Page 9

Advertising
background image

6

SHSS 12 B2

GB

Before fi rst use

NOTE

This appliance is supplied with non-charged
batteries. The batteries must be charged for
6 hours before the fi rst use.

Remove all packaging materials as well as foils
and stickers

Charging the appliance

NOTE

Ensure that the appliance is switched off
before starting to charge the batteries.

To charge the appliance, connect the charger i
to a mains socket and insert the barrel jack o
into the charging socket s on the cradle d.
Feed the cable through the cable channel on the
charging socket s, so that the cradle d is not
resting on the cable.

Place the handle with the attached hand element
4 onto the cradle d.
The red control lamp 3 illuminates.
When the appliance is fully charged, the indicator
light 3 illuminates green.

Assembly/disassembly

Connecting the hand element to the
handle/removal from handle

Fig. 1

Fig. 2

To connect the hand element 4 to the handle,
push the tip of the hand element 4 into the
opening in the hand element recess e.

Then press the grip 1 of the hand element 4
into the handle so that the hand element 4
clicks fi rmly into position (Fig. 1).

To remove the hand element 4 from the handle,
press the "Hand element" release w.

Then pull the hand element 4 upwards and
forwards out of the hand element recess e
(Fig. 2).

IB_100116_SHSS12B2_LB4.indb 6

19.09.14 13:49

Advertising