Silvercrest Energy Monitor - Manual (Page 16)

18 GB
Operation
j 
The LCD 1 now indicates the present current in A
(Ampere) required for use of the electrical appliance.
note: you can also call up the current reading when
the wattmeter has been removed from the outlet or when
the electrical appliance you are testing is no longer
connected to the wattmeter. As soon as you take a new
measurement, the old current is overwritten.
Q  Maximum current
j 
Press the “UP” button 5 until the Max symbol 20 and
the Ampere symbol 9 appear in the top third of the
LC display 1 .
j 
The LCD 1 now indicates the maximum required current
in A (Ampere) measured with the wattmeter so far.
note: you can also call up the maximum current reading
when the wattmeter has been removed from the outlet or
when the electrical appliance you are testing is no longer
connected to the wattmeter.
note: the maximum current value is saved until a higher
value is measured. The old value is then overwritten by
the new measurement.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 18 26.11.10 10:12