Silvercrest Energy Monitor - Manual (Page 24)

26 GB
Operation
power cost meter then works on the basis of this flat rate
round the clock.
note: make sure that the standard display (see “Display
current”) appears in the top third of the LC display 1 .
1. Press the “DOWN” button 4 until the price per KWh
symbol 19 (“PRICE KWh”) appears in the centre of the
LC display 1 .
2. Press the “UP” button 5 so that “- -:- -” appears in the
bottom third of the LC display 1 .
3. Press the “SET” button 2 . The first digit begins to flash.
4. Press the “UP” 5 or “DOWN” button 4 to set the
units digit before the decimal point of the current price
per kWh in Euro (€). Example: 1.000
5. Press the “SET” button 2 to move to the next digit.
6. Press the “UP” 5 or “DOWN” button 4 to set the
hundreds digit of the current price per kWh in Eurocent (€).
Example: 1.100
7. Press the “SET” button 2 to move to the next digit.
8. Repeat step 6 to set the tens and units digit. Example: 1.111
9. Press the “PRICE” button 3 to confirm your entry.
note: the setting made here affects the “Display energy
costs” function.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 26 26.11.10 10:12