Silvercrest Energy Monitor - Manual (Page 25)

27 GB
Operation
Q  Total energy consumption
note: this mode displays the accumulated total energy in
kWh consumed by connected electrical devices since the
start of measurement.
note: Check that standard displays (see “Measuring the
current“ and “Measuring the mains voltage“) appear in the
top and middle thirds of the LC display 1 .
j 
Press the “PRICE” button 3 repeatedly until the kilowatt-
hours symbol 17 and the total symbol 16 appear in the
bottom third of the LC display 1 .
 
note: the “Total power consumption” function is the
standard setting for the wattmeter. As soon as the isolating
strip between the two round cell batteries is removed, the
wattmeter is automatically in this mode.
j 
The LCD 1 now indicates the total amount of energy
consumed in kWh (kilowatt hours).
note: the measuring range of the wattmeter is between
0.00 and 9999.99 kWh.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 27 26.11.10 10:12